48채널 디지털 기록계 (SR-600C)
(Digital Data Recorder)
◆ 개요(Description)
▶ 최대48채널 Paperless Digital 기록계
▶ 범용 입력 채널(아날로그 신호 입력-Temp / Current / Volt)
▶ USB 데이터 전송 인터페이스
▶ 최대 8 루프 제어 및 18 채널 알람 출력 또는 12 채널 아날로그 출력
▶ 다중 화면표시 선택: Bar graph / Curve / Digital / 경보 상태 표시 등
▶ RS232 / 485 통신 인터페이스, 이더넷 인터페이스, 미니 프린터 인터페이스, USB 인터페이스 및 SD 카드 소켓을 장착
▶ 날짜 및 시간 달력 검색 기능 사용하여 과거 데이터 확인
▶ 방진 및 방적 전면 패널
▶ 저장된 데이터 손실 방지(플래시 메모리에 저장된 모든 데이터, 정전 시에도 손실되지 않음)
▶ 0.2% FS±1d 정밀도
▶ 1, 2, 4, 6, 15, 30, 60, 120 and 140s (기록 속도)
█ Input measurement & Output signal
Input signal | Current: 0~20mA, 0~10mA, 4~20mA, 0~10mAsquare root, 4~20mAsquare root |
Voltage: 0~5V, 1~5V, 0~10V, ±5V, 0~5V square root, 1~5V square root, 0~20 mV, 0~ 100mV, ±20mV, ±100mV | |
Thermal resistance: Pt100, Cu50, Cu53, Cu100, BA1, BA2 | |
Linear resistance: 0~400Ω | |
Thermocouple: B, S, K, E, T, J, R, N, F2, Wre3-25, Wre5-26 | |
Output signal | Analog output: 4~20mA (load resistance ≤380Ω), 0~20mA (load resistance ≤380Ω), 0~ 10mA(load resistance ≤760Ω), 1~5V (load resistance ≥250KΩ), 0~5V (load resistance ≥ 250KΩ), 0~10V (load resistance ≥500KΩ) |
Alarm output: normally open relay contact output, where the contact capacity is 1 A/250 VAC (resistive load) (! Note: Please do not carry load directly in case the load exceeds the contact capacity of relay.) | |
Feed output: DC24 V ± 1, load current ≤ 250 mA | |
Communication output: RS485/RS232 communication interface, 1,200 ~ 57,600 bps baud rate (able to be set); standard MODBUS RTU communication protocol is adopted; the communication distance of RS-485 can be as long as 1 kilometer; the communication distance of RS-232 can be as long as 15 m; EtherNet communication interface is adopted, where the communication speed is 10 M. |
█ Comprehensive parameters
Measurement accuracy | 0.2% FS±1d |
Sampling period | 1s |
Setting mode | The button is set in the form of panel soft touch; setting values of parameters are locked with passwords and will be saved permanently in case of outage. |
Display method | 7-inch 800 * 480 dot-matrix widescreen TFT high brightness color graphics and LCD display; LED backlight; with clear pictures and wide visual angle. Display contents can be composed of characters, figures, conditional curves, bar graphs, etc.; through panel button, page turning, forward and backward search of historical data, time scale change of curves, etc. can be realized. |
Data backup | Data backup and conversion storage of USB flash disk and SD card are support, where the maximum capacity is 8 GB; FATand FAT32 formats are supported. |
Storage capacity | The capacity of the internal Flash memory is 64 M Byte. |
Recording interval | Nine options including 1, 2, 4, 6, 15, 30, 60, 120 and 140s can be selected. |
Storage length (continuous record without power-off) | 24 days (1 s interval) – 5825 days (240 s interval) Calculation formula: recorded time (day) (! Note: For calculation of channel number, the program divides the channel number into five options, namely 4, 8, 16, 32 and 64, and the bigger figure should be regarded as the channel number for calculation in case the channel number of the instrument is between the said two options. For example: If the channel number of the instrument is 12, then 16 should be adopted in the formula.) |
Environment condition | Environment temperature: -10 ~ 50°C; Relative humidity: 10 ~ 90% RH (without condensation of moisture); Avoidance of contact of high corrosive gas. (! Note: If the field environment is poor, special instruction should be given when ordering.) |
Working power supply | AC 85 ~ 264 V (power supply of the switches), 50/60 Hz; DC12 ~ 36 V (power supply of the switches); |
power consumption | ≤20W. |