붕해 시험기(2구)-터치 스크린 (DTG-200i)
(Disintegration Tester)
◆ 개요(Description)
▶ 신뢰할 수 있는 규정 준수 혁신 붕해 시험기-측정기 (Disintegration Tester)
▶ Ph. Eur. and USP 약전규정 준수 제품
▶ 손쉽고 간단한 터치 스크린(touchscreen) 선택 및 제어
▶ 아이콘 기반 메뉴 구조의 직관적 인 터치 스크린 제어로 작동을 단순화하고
실행 전반에 걸쳐 테스트 설정 변수를 명확하게 표시
▶ 1~4 개의 테스트 스테이션 장치구성 및 독립 스테이션 제어 장치(옵션)
▶ 붕해 상하운동 가속 또는 고감도 테스트를 위해 조정 가능한 손쉬운 제어
▶ 통합 된 정밀 온도 제어 및 측정(손실온도보정을 위한 Off-set 기능)
▶ 단일 포인트 전자 온도 교정
▶ 고급 부식 방지 코팅 처리 된 견고한 금속 케이스
▶ 가열 및 순환장치는 스테인리스 재질
▶ 편리한 배수구 탭으로 배출 용이
▶ 낮은 작동 소음 수준의 편안한 작업 환경
▶ 터치 스크린 아이콘 및 심볼(Icon & Symbol)
▽ Setting a test parameter
▽ Set v Actual test parameters (before test run)
▽ Set v Actual test parameters (during test run, with test progress bar)
▽ Settings menu
▽ Passcode-protected temperature calibration process
▽ Temperature calibration
▽ Report output settings menu
▶ 광범위한 데이터보고 출력 (옵션: 연결기기)
▽ RS 232
▽ USB A (for connection with a USB printer)
▽ USB B (for connection with a PC)
▽ 시스템 자동화 및 원격 제어 (옵션)
█ 데이터 출력 표시 (Set/Average/Maximum/Minimum)
▷ Speed (cycles per minute)
▷ Temperature (°C)
▷ Test Duration (HH:MM:SS)
▷ Calibration Data (Calibration date/Temperature calibrated at °C)
◆ 제품사양(Specifications)
약전준수 규정 (Pharmacopoeia Compliance) | Ph. Eur. Chapter: 2.9.1 USP Chapter: <701> and <2040> |
사용자 인터페이스 | Resistive touchscreen |
바스켓 랙 어셈블리 | Automatically lowered and raised at beginning and end of test run |
붕해 상하 이동 측정범위 | 10 ~ 50 strokes/min, 10CPM ~ 50CPM (±1 CPM) |
붕해 상하 이동 높이 및 정밀도 | 55 ± 1 mm |
가열 히터 타입 | Independent digital heater/circulator |
가열 히터 컨트롤 범위 | 0°C ~ 80°C (0.1°C) |
테스트 실행 시간 | 99 hours , 59 minutes, 59 seconds |
경보-알람음 | 1. End of testing (audible) 2. Low bath water level warning on-screen indicator |
데이터 출력 | RS 232 USB A (for connection with a USB printer) USB B (for connection with a PC) |
█ 기본 포함 장비(Basic Included Equipment)
▲ 매뉴얼 (영문 / 한글)
▲ 온도센서 교정 성적서 포함 (Electronic Temperature Calibration Key)
▲ 바스켓 교정 성적서 포함 (Extra for Numbering and Certification-per basket)
█ 옵션 장비(Optional equipment)
▲ 수행 평가 문서 (IQ/OQ/PQ Documentation Pack): 수행평가 별도
▲ 수행평가 측정기(Qualification Tools)
▲ 재 교정 측정기(Re-Calibration of Qualification Tools)
▲ 외부 미니프린터 (Printer-including USB cable)
▲ Basket Rack Cover for Hard & Soft Gelatine Capsules
▲ Extra for Numbering and Certification (per cover)
▲ Special Basket Rack Assembly for Large Tablets & Capsules
▲ Extra for Numbering and Certification (per basket)